-
4/6 Channel LCD Digital Hotplate Magnetic Stirrer
- Ceramic coating aluminum work plate with fast heat transmission and strong resistance to corrosion.
- Powerful, rapid heating with accurate PID temperature control
- Spark-free DC brushless motor with extended life and no maintenance
- Compatible with various heating block or reaction vessels for a variety of application scenario
- Ultra space-saving with 4/6 channel integrated in one instrument
- “HOT” warning flashes on the LCD display if the work plate temperature is above 50℃ after the user turn off the power switch.
- Two independent safety circuits keep monitoring the instrument.When overheating is detected and the sensor malfunctions, it will stop heating and sound alarm; When short circuit is detected, it will cut off the power to ensure the human safety.
- Reliable safety mechanism, compliant to IEC61010-1UL61010-1BSEN61010-1CANCSA-C22.2NO.61010-1and all other safety regulations of laboratory heating devices, competent with tasks without human surveillance.
-
MS-H220-V3MS-H220-V5 LCD Digital Heating Magnetic Stirring Bath
- High borosilicate glass liner, resistant to sudden changes from hot to cold without breaking, transparent glass window for monitoring reaction product changes; stainless steel base, rust-resistant, easy to clean; high-temperature
- resistant protective outer shell to prevent direct contact with hot glass and burns.
- Dual-use stirring bath for water and oil, with secondary stirring in the bath pot. The stirring of the bath liquid simultaneously stirs the liquid sample in the flask, ensuring uniform heating of both bath liquid and sample.
- Safety lock to prevent accidental changes in operational status.
- Buzzer: A “beep beep beep” alert sounds when the countdown timer function ends. Button tone.
- Features a timer function with a range of 1 min to 99h59min. It stops heating when the countdown ends but continues stirring to prevent heat damage to the sample.
- Touch buttons with audible prompts.
- Working status indicator light: Green during operation, flashing green before reaching set temperature; alarm red.
- Reversible function.
- Protection features: dry burning protection, overcurrent protection, ground fault protection, and over temperature protection.
- Residual heat warning function. When the plate temperature is above 50℃ , heating is turned off, and the screen flashes “HOT” as a reminder of the high temperature even after the power is off.
- Two independent safety circuits continuously monitor the device. In case of overheating, sensor failure, or circuit short, the machine will error report and stop heating or automatically cut off power to ensure operator safety.
- DC brushless motor, spark-free, long life; low noise, maintenance-free, stable operation.
- LCD displays speed, time, and temperature parameters clearly and intuitively.
-
DMS7-550M LCD Glass Ceramic Heating Magnetic Stirrer with Timer
- The ceramic plate has strong corrosion resistance, capable of withstanding strong acids, alkalis, and high temperatures. It is easy to clean solvents, oils, or other contaminants that may accidentally spill.
- The corrosion-resistant full metal casing has excellent heat dissipation performance and reliable fire protection capabilities.
- The efficient flow platform and waterproof design prevent liquids from entering the interior of the machine, protecting the electronic components from corrosion.
- High-temperature resistant, strong magnetic stirrers provide powerful stirring force, suitable for mixing viscous liquids.
- Safety lock to prevent accidental changes in operating status.
- Buzzer: When the machine malfunctions or the countdown for the timing function ends, the buzzer emits a “beep” sound to alert the user.
- Residual heat warning: When the plate temperature exceeds 50°C, heating will be automatically turned off, and the display will show a flashing “HOT” warning. Even when the power is turned off, the “HOT” warning will continue flashing on the display, alerting the user of the high temperature.
- Two independent safety circuits continuously monitor the device. In case of overheating, sensor malfunction, or a system error, the machine will stop heating. If a short circuit occurs, the power will be automatically cut off, ensuring the operator’s safety.
- DC brushless motor: Spark-free, long lifespan, low noise, maintenance-free, and smooth operation.
- LCD display: Shows set and real-time values for speed, time, and temperature, offering clear and intuitive readings.
- The timer function is available with a range of 1 minute to 99 hours and 59 minutes. Once the countdown ends, heating will stop, but stirring will continue to avoid thermal damage to the sample.
- Remote control function is available, allowing the device to be connected to a computer.
- Safety temperature can be set.
-
DMS5-340 LCD Heating Magnetic Stirrer with Timer
- Ceramic-coated aluminum plate, with strong corrosion resistance and easy to clean.
- Corrosion-resistant full metal casing with excellent heat dissipation performance and reliable fire protection capabilities.
- Strong magnetic field, ideal for mixing viscous samples.
- High protection level: IP42.
- Heating modes:
A: Rapid heating mode
B: Standard heating mode
C: Stable heating mode
- To meet different customer needs.
- Safety lock to prevent accidental changes in operating status.
- Buzzer: When the machine malfunctions or the countdown for the timing function ends, the buzzer emits a “beep” sound to alert the user.
- Residual heat warning: When the plate temperature exceeds 50°C, heating will be automatically turned off, and the display will show a flashing “HOT” warning. Even when the power is turned off, the “HOT” warning will continue flashing on the display, alerting the user of the high temperature.
- Two independent safety circuits continuously monitor the device. In case of overheating, sensor malfunction, or system error, the machine will stop heating. If a short circuit occurs, the power will be automatically cut off, ensuring the operator’s safety.
- DC brushless motor: Spark-free, long lifespan, low noise, maintenance-free, and smooth operation.
- LCD display shows set and real-time values for speed, time, and temperature, offering clear and intuitive readings.
- The timer function is available with a range of 1 minute to 99 hours and 59 minutes. Once the countdown ends, heating will stop, but stirring will continue to avoid thermal damage to the sample.
- Remote control function is available, allowing the device to be connected to a computer.
- The device comes with a variety of accessories, making it suitable for chemical synthesis laboratories in universities, research institutes, and enterprises.
- Safety temperature can be set.
-
DMS5-340M LCD Strong Magnetic Heating Magnetic Stirrer with Timer
- Ceramic-coated aluminum plate, with strong corrosion resistance and easy to clean.
- Corrosion-resistant full metal casing with excellent heat dissipation performance and reliable fire protection capabilities.
- Selected high-temperature resistant strong magnetic stirrers, providing powerful stirring force, suitable for mixing viscous liquids.
- Strong magnetic field, ideal for mixing viscous samples.
- High protection level: IP42.
- Heating modes:
A: Rapid heating mode
B: Standard heating mode
C: Stable heating mode
- To meet different customer needs.
- Safety lock to prevent accidental changes in operating status.
- Buzzer: When the machine malfunctions or the countdown for the timing function ends, the buzzer emits a “beep” sound to alert the user.
- Residual heat warning: When the plate temperature exceeds 50°C, heating will be automatically turned off, and the display will show a flashing “HOT” warning. Even when the power is turned off, the “HOT” warning will continue flashing on the display, alerting the user of the high temperature.
- Two independent safety circuits continuously monitor the device. In case of overheating, sensor malfunction, or system error, the machine will stop heating. If a short circuit occurs, the power will be automatically cut off, ensuring the operator’s safety.
- DC brushless motor: Spark-free, long lifespan, low noise, maintenance-free, and smooth operation.
- LCD display shows set and real-time values for speed, time, and temperature, offering clear and intuitive readings.
- The timer function is available with a range of 1 minute to 99 hours and 59 minutes. Once the countdown ends, heating will stop, but stirring will continue to avoid thermal damage to the sample.
- Remote control function is available, allowing the device to be connected to a computer.
- The device comes with a variety of accessories, making it suitable for chemical synthesis laboratories in universities, research institutes, and enterprises.
- Safety temperature can be set.
-
DMS4-550 LCD Glass Ceramic Heating Magnetic Stirrer with Timer
- The ceramic-coated plate offers excellent corrosion resistance, capable of withstanding strong acids, strong alkalis, and high temperatures. It is easy to clean spilled solvents, oils, or other contaminants.
- The corrosion-resistant full metal housing provides good heat dissipation and reliable fire protection.
- The efficient drainage platform and raised waterproof edge prevent liquids from entering the machine and corroding internal electronic components.
- Selected high-temperature resistant strong magnets provide powerful stirring force, suitable for mixing viscous liquids.
- The safety lock prevents accidental changes to the operating status.
- Buzzer: When a fault occurs or the timer countdown ends, the buzzer emits a “beep beep beep” alert sound.
- Residual heat warning function: When the plate temperature exceeds 50°C, heating is turned off and the screen displays a flashing “HOT” warning. Even after power-off, the display continues to flash “HOT” to indicate high temperature.
- Dual independent safety circuits continuously monitor the device. In the event of overheating or sensor failure, the machine shows an error and stops heating. If a short circuit occurs, the power is automatically cut off to ensure operator safety.
- The brushless DC motor is spark-free, long-lasting, low-noise, maintenance-free, and runs smoothly.
- The LCD displays both set and real-time values for speed, time, and temperature, providing clear and intuitive readouts.
- Timer function: Settable from 1 minute to 99 hours 59 minutes. When the countdown ends, heating stops but stirring continues, preventing thermal damage to samples.
- Remote control function is available, allowing connection to a computer.
- Safety temperature can be preset.
-
DMS5-280/120 LED Heating Magnetic Stirrer
- Equipped with an LED display, it accurately shows temperature and speed, providing real-time data during experiments and ensuring easy operation.
- The speed runs stably, adapting to various experimental requirements and delivering uniform stirring results.
- Temperature is adjustable, reaching up to 280°C（DMS5-280）, suitable for a variety of heating experiments, with precise temperature control.
- Supports dual temperature sensors, accurately monitoring the heating plate and solution temperatures, further enhancing heating efficiency and safety.
- Overheat protection function: If the heating plate temperature exceeds 50°C, the screen automatically displays a flashing “HOT” warning. Even when powered off, the warning remains visible, enhancing safety during use.
- Features a ceramic-coated heating plate, offering excellent heat conductivity, corrosion resistance, and wear resistance, making it suitable for long-term high-temperature use.
- Equipped with a touch panel, it provides simple and intuitive operation, improving user experience. Its compact design makes it easy to operate and store in laboratory environments.
- Powerful magnetic stirring performance, ensuring uniform stirring of various solutions to meet diverse experimental needs.
-
MS-H380-F100/250/500/1000/2000 LCD Digital Magnetic Stirrer Heating Mantle
- Data communication:RS232 interface.
- Buzzer alert: countdown timer end is indicated by a”beep-beep-beep” sound.
- Timer function: time range from 1 minute to 99 hours 59 minutes. Heating stops when countdown ends, butstirring continues to avoid sample damage from residual heat.
- Operating status indicator lights:Green is Reached to set temperature; Blinking green is heating to settemperature; Red is fault/alarm.
Application Scenarios
Organic synthesis,polymerization, distillation and purification,sample dissolution and extraction, sample pretreatment before analysis, catalytic reaction kinetics research, etc,
Target Customers
Technicians in chemical, biological, pharmaceutical, and materials enterprises,researchers in universities and research institutes, quality control analysts in laboratories related to pharmaceuticals, food.environmental protection, etc.
-
C410 Chemistry-design diapharm pump
Maximum Vacuum:13mbar
Work Mode: Continuous Operation
Nozzle Size:8mm, Power: 95W
Motor speed:1450rpm
Flow Rate:
mbar 1000 | 880 | 750 | 600 | 480 | 280
L/min 25 | 22 | 20 | 12 | 7.5 | 5
Noise:50dB
-
VC100 Vacuum Controller
- Wide range of measurement and control, 1-1,000mbar
- Two control modes available Single-point control and programmed control
- Stores up to 5 programs, each containing up to 5 steps of programming control
- Large TFT touch screen display control provides easy operation
- All parts in contact with vapor or liquid are made of PTFE, ceramics or other high-performance materials which effectively resists corrosion caused by organic solvents, water, acid and alkali
- Built-in vent valve can feed inert gas into system equipment
- One-click decompression allows easy installation and dismantling of vacuum system
- Can be connected with pump power control for temporary shutdown of pump power supply after reaching stable degree of vacuum for energy conservation and environmental protection.
- Can also be operated in the normally open status of pump
- Reliable and functional design to fulfill essential needs of precise vacuum regulation
-
DCP-5 Low-Temperature Cooling Circulator
The low-temperature cooling circulator (or thermostat) is an effi temperature through pumping low-temperature cooling fluid. It is cient temperature control device that regulates suitable for laboratories, pharmaceuticals, chemicals, and semiconductor industries where stable low-temperature environments are required.
- Easy Operation: LED display, simple menu, one-touch start.
- Compact Design: Small size, suitable for desktops and fume hoods.
- Precise Temperature Control: Built-in sensor and PID technology ensure high temperature stability.
- Convenient Handling: Top liquid filling, rear draining, clear liquid level, with overflow protection.
- Rapid Response: Quickly adjusts to load and temperature changes, with strong adaptability.
- Eco-Friendly Refrigerant: Non-toxic, non-polluting, with excellent cooling performance.
- Energy Efficiency: Proportional cooling adjustment for low-energy operation.
- Stable Circulation System: Powerful pump ensures uniform cooling.
- Extended Lifespan: Low-speed operation reduces wear.
- Low Noise: Suitable for quiet environments.
- Easy Cleaning: Removable panel for easy filter cleaning and convenient drainage.
- High-Quality Insulation: Reduces heat exchange, ensuring temperature stability.
- Rapid Heat Dissipation: Prevents overheating, maintaining stable equipment operation.
Application
- Laboratory Cooling: Provides stable low-temperature environments for condensers, rotary evaporators, spectrometers, and other equipment.
- Chemical Reaction Cooling: Controls reaction temperatures, preventing overheating and ensuring product quality.
- Pharmaceutical and Biotech Applications:ore. Precise low-temperature control for freeze drying, enzyme reactions, blood preservation, and more.
- Semiconductor Manufacturing: Supplies low-temperature environments for semiconductor equipment, ensuring process stability.
- Food and Beverage Processing: Maintains constant low temperatures during food processing and storage, extending product freshness.
-
DCP-17 Low-Temperature Cooling Circulator
The low-temperature cooling circulator (or thermostat) is an effi temperature through pumping low-temperature cooling fluid. It is cient temperature control device that regulates suitable for laboratories, pharmaceuticals, chemicals, and semiconductor industries where stable low-temperature environments are required.
- Easy Operation: LED display, simple menu, one-touch start.
- Compact Design: Small size, suitable for desktops and fume hoods.
- Precise Temperature Control: Built-in sensor and PID technology ensure high temperature stability.
- Convenient Handling: Top liquid filling, rear draining, clear liquid level, with overflow protection.
- Rapid Response: Quickly adjusts to load and temperature changes, with strong adaptability.
- Eco-Friendly Refrigerant: Non-toxic, non-polluting, with excellent cooling performance.
- Energy Efficiency: Proportional cooling adjustment for low-energy operation.
- Stable Circulation System: Powerful pump ensures uniform cooling.
- Extended Lifespan: Low-speed operation reduces wear.
- Low Noise: Suitable for quiet environments.
- Easy Cleaning: Removable panel for easy filter cleaning and convenient drainage.
- High-Quality Insulation: Reduces heat exchange, ensuring temperature stability.
- Rapid Heat Dissipation: Prevents overheating, maintaining stable equipment operation.
Application
- Laboratory Cooling: Provides stable low-temperature environments for condensers, rotary evaporators, spectrometers, and other equipment.
- Chemical Reaction Cooling: Controls reaction temperatures, preventing overheating and ensuring product quality.
- Pharmaceutical and Biotech Applications:ore. Precise low-temperature control for freeze drying, enzyme reactions, blood preservation, and more.
- Semiconductor Manufacturing: Supplies low-temperature environments for semiconductor equipment, ensuring process stability.
- Food and Beverage Processing: Maintains constant low temperatures during food processing and storage, extending product freshness.
